Cisco 640-802 Dumps PDF, Provide Latest Cisco 640-802 Test Engine Are Based On The Real Exam

Welcome to download the newest Examwind 350-029 VCE dumps: http://www.examwind.com/350-029.html

Flydumps Cisco 640-802 exam questions which contain almost 100% correct answers are tested and approved by senior Microsoft lecturers and experts.They have been devoting themselves to providing candidates with the best study materials to make sure what they get are valuable.Get a complete hold on Cisco 640-802 dumps on Flydumps,you will pass the exam absolutely.

QUESTION 77
The Certkiller network is displayed below:

You are a network administrator and you want to configure a static route to the network 10.5.6.0 /24 on router Certkiller . Which command can be used? (Choose two.)
A. Certkiller (config)# ip route 10.5.6.0 0.0.0.255 fa0/0
B. Certkiller (config)# ip route 10.5.6.0 0.0.0.255 10.5.4.6
C. Certkiller (config)# ip route 10.5.6.0 255.255.255.0 fa0/0
D. Certkiller (config)# ip route 10.5.6.0 255.255.255.0 10.5.4.6
E. Certkiller (config)# ip route 10.5.4.6 0.0.0.255 10.5.6.0
F. Certkiller (config)# ip route 10.5.4.6 255.255.255.0 10.5.6.0

Correct Answer: CD
QUESTION 78
Drag the connection types on the left to the appropriate type of cable used on the right. (Not all options are used.)
Router to hub Crossover
PC to router Fa0/0
PC to switch Fa0/1
Modem to router auxiliary port Straight-through
PC serial port to switch console port
Switch1 port Fa0/1 to switch2 port Fa0/1
Rollover
A.
B.
C.
D.

Correct Answer:
QUESTION 79
A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration? Choose three.)
A. A switch in the VTP client mode cannot update its local VLAN database
B. A trunk link must be configured between the switches to forward VTP updates
C. A switch in the VTP server mode can update a switch in the VTP transparent mode
D. A switch in the VTP transparent mode will forward updates that it receives to other switches
E. A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number
F. A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership

Correct Answer: ABD
QUESTION 80
A Catalyst 2950 needs to be reconfigured. What steps will ensure that the old configuration is erased? (Choose three.)
A. Erase flash.
B. Restart the switch.
C. Delete the VLAN database.
D. Erase the running configuration.
E. Erase the startup configuration.
F. Modify the configuration register.

Correct Answer: BCE
QUESTION 81
R 10.10.10.8 [120/2] via 10.10.10.6, 00:00:25, Serial0/1
What can be determined from the line of show ip route output shown in the exhibit? (Choose two.)

A. The next routing update can be expected in 35 seconds
B. The IP address 10 10.10.6 is configured on S0/1
C. The IP address 10 10.10.8 is configured on S0/1
D. This route is using the default administrative distance
E. The 10.10.10.8 network is two hops away from this router

Correct Answer: DE
QUESTION 82
To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met? Select two.
A. Each end of the trunk line must be set to IEEE 802.1E encapsulation.
B. The VTP management domain name of both switches must be set the same.
C. All ports on both the switches must be set as access port.
D. One of the two switches must be configured as a VTP server.
E. A rollover cable is required to connect the two switches together.
F. A router must be used to forward VTP traffic between VLANs.

Correct Answer: BD
QUESTION 83

Drag the security features on the left to the specific security risks they help protect against on the right. (Not all options are used.)
access-group
console password
enable secret
CHAP authentication
VTY password
service password-encryption

remote access to device console
access to the console 0 line
access to connected networks or resources
viewing of passwords
access to privileged mode

A.
B.
C.
D.
Correct Answer:
QUESTION 84
Refer to the exhibit. What commands must be configured on the 2950 switch and the router to allow communication between host 1 and host 2? (Choose two.)

A. Router(config)# interface fastethernet 0/0 Router(config-if)# ip address 192.168.1.1 255.255.255.0 Router(config-if)# no shutdown
B. Router(config)# interface fastethernet 0/0 Router(config-if)# no shutdown Router(config)# interface fastethernet 0/0.1 Router(config-subif)# encapsulation dot1q 10 Router(config-subif)# ip address 192.168.10.1 255.255.255.0 Router(config)# interface fastethernet 0/0.2 Router(config-subif)# encapsulation dot1q 20 Router(config-subif)# ip address 192.168.20.1 255.255.255.0
C. Router(config)# router eigrp 100 Router(config-router)# network 192.168.10.0 Router(config-router)# network 192.168.20.0
D. Switch1(config)# vlan database Switch1(config-vlan)# vtp domain XYZ Switch1(config-vlan)# vtp server
E. Switch1(config)# interface fastethernet 0/1 Switch1(config-if)# switchport mode trunk
F. Switch1(config)# interface vlan 1 Switch1(config-if)# ip default-gateway 192.168.1.1

Correct Answer: BE
QUESTION 85

Place the Spanning-Tree Protocol port state on its function by dragging the state on the left to the correct target on the right. (Not all options on the left are used.)
Root
Listening
Learning
Active
Forwarding
Blocking

populating the MAC address table but not forwarding data frames
sending and receiving data frames
preparing to forward data frames without populating the MAC address table
preventing the use of looped paths

A.
B.
C.
D.
Correct Answer:
QUESTION 86
A Certkiller remote office branch is set up as shown in the diagram below:

All of the hosts in the above exhibit are connected with each other via the single Catalyst switch. Which of the following statements correctly describe the addressing scheme of this network? (Select three)
A. The subnet mask in use is 255.255.255.192.
B. The subnet mask in use is 255.255.255.128.
C. The IP address 172.16.1.25 can be assigned to hosts in VLAN1.
D. The IP address 172.16.1.205 can be assigned to hosts in VLAN1
E. The LAN interface of the router is configured with one IP address.
F. The LAN interface of the router is configured with multiple IP addresses.

Correct Answer: BCF
QUESTION 87

Drag the cable type on the left to the purpose for which it is best suited on the right. (Not all options are used.)
crossover
null modem
straight-through
rollover
9-25 pin serial

switch access port to router
switch to switch
PC COM port to switch

A.
B.
C.
D.
Correct Answer:
QUESTION 88
Which of the following are true statements regarding the use of VLANs to segment a network? (Select three.)
A. They increase the size of collision domains
B. They allow logical grouping of users by function.
C. They can enhance network security.
D. They increase the size of the broadcast domain while decreasing the number of collision domains.
E. They increase the number of broadcast domains while decreasing the size of the broadcast domains.
F. They simplify switch administration.

Correct Answer: BCE
QUESTION 89
Which of the following correctly describe steps in the OSI data en capsulation process7? (Choose two.)
A. The transport layer divides a data stream into segments and adds reliability and flow control information.
B. The data link layer adds physical source and destination addresses and an FCS to the segment.
C. Packets are created when the network layer encapsulates a frame with source and destination host addresses and protocol-related control information.
D. Packets are created when the network layer adds Layer 3 addresses and control information to a segment.
E. The presentation layer translates bits into voltages for transmission across the physical link.

Correct Answer: AD
QUESTION 90

Drag the options on the left under the type of switch port that they describe on the right.
Carries traffic for a single VLAN
facilitates interVLAN communication when connected to a Layer 3 device
connects an end-user workstation to a switch
Carries traffic for multiple VLANs
Uses 802.1q to identify traffic from different VLANs
Uses a straight-through cable to connect a device

Access Port

Trunk Port
A.
B.
C.
D.
Correct Answer:
QUESTION 91
Which of the following IP addresses fall into the CIDR block of 115.64.4.0/22? (Choose three.)
A. 115.64.8.32
B. 115.64.7.64
C. 115.64.6.255
D. 115.64.3.255
E. 115.64.5.128
F. 115.64.12.128

Correct Answer: BCE QUESTION 92
Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts? (Choose three.)
A. 15.234.118.63
B. 92.11.178.93
C. 134.178.18.56
D. 192.168.16.87
E. 201.45.116.159
F. 217.63.12.192

Correct Answer: BCD
QUESTION 93

The internetwork infrastructure of Certkiller consists of a single OSPF area as shown in the graphic. There is concern that a lack of router resources is impeding internetwork performance. As part of examining the router resources, the OSPF DRs need to be known. All the router OSPF priorities are at the default and the router IDs are shown with each router. Which routers are likely to have been elected as DR? (Choose two)
A. Certkiller -1
B. Certkiller -2
C. Certkiller -3
D. Certkiller -4
E. Branch-1
F. Branch-2

Correct Answer: DF QUESTION 94
The network 172.25.0.0 has been divided into eight equal subnets. Which of the following IP addresses can be assigned to hosts in the third subnet if the ip subnet-zero command is configured on the router? (Choose three)
A. 172.25.78.243
B. 172.25.98.16
C. 172.25.72.0
D. 172.25.94.255
E. 172.25.96.17
F. 172.25.100.16

Correct Answer: ACD
QUESTION 95
Exhibit:

Study the Exhibit carefully. What will Router Certkiller A do when it receives the data frame shown? (Choose three.)
A. Router Certkiller A will strip off the source MAC address and replace it with the MAC address 0000.0c36.6965
B. Router Certkiller A will strip off the source IP address and replace it with the IP address 192.168.40.1
C. Router Certkiller A will strip off the destination MAC address and replace it with the MAC address 0000.0c07 .4320
D. Router Certkiller A will strip off the destination IP address and replace it with the IP address of
192.168.40.1
E. Router Certkiller A will forward the data packet out interface FastEthernet0/1
F. Router Certkiller A will forward the data packet out interface FastEthernet0/2

Correct Answer: ACF
QUESTION 96

Refer to the exhibit. Which destination addresses will Host A use to send data to Host B? (Choose two.)
A. the IP address of Switch1
B. the IP address of Router1 Fa0/0
C. the IP address of HostB D. the MAC address of Switch1
E. the MAC address of Router1 Fa0/0
F. the MAC address of HostB

Correct Answer: CE
QUESTION 97

Drag the appropriate 5 steps of the boot sequence on the left to their correct slots on the right. (Not all options apply.)
The IOS is located and loaded based on boot system commands in NVRAM
If no IOS is located, the setup dialog initiates
The router looks for the configuration file in NVRAM
If no configuration file is located, the setup dialog initiates
The power-on self test executes
The router enters ROM monitor mode
The bootstrap loader in ROM executes

Step 1
Step 2
Step 3
Step 4
Step 5

A.
B.
C.
D.
Correct Answer:
QUESTION 98

The switches shown in the diagram, Core and Core2, are both Catalyst 2950s. The addressing scheme for each company site is as follows:
Router Ethernet port – 1st usable address Core – 2nd usable address Core2 – 3rd usable address
For this network, which of the following commands must be configured on Core2 to allow it to be managed remotely from any subnet on the network? (Choose three.)
A. Core2(config)# interface f0/0 Core2(config-if)# ip address 192.168.1.10 255.255.255.248
B. Core2(config)# interface vlan 1 Core2(config-if)# ip address 192.168.1.11 255.255.255.248
C. Core2(config)# line con 0 Core2(config-line)# password cisco
D. Core2(config)# line vty 0 4 Core2(config-line)# password cisco
E. Core2(config)# ip default-gateway 192.168.1.9
F. Core2(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.8

Correct Answer: BDE
QUESTION 99

Refer to the exhibit. Each of these four switches has been configured with a hostname, as well as being configured to run RSTP. No other configuration changes have been made. Which three of these show the correct RSTP port roles for the indicated switches and interfaces? (Choose three.)
A. SwitchA, Fa0/2, designated
B. SwitchA, Fa0/1, root
C. SwitchB, Gi0/2, root
D. SwitchB, Gi0/1, designated
E. SwitchC, Fa0/2, root
F. SwitchD, Gi0/2, root

Correct Answer: ABF
QUESTION 100

Refer to the graphic. Host 1 cannot receive packets from Host 2. Assuming that RIP v1 is the routing protocol in use, what is wrong with the IP configuration information shown? (Choose two.)
A. The fa0/1 interface of router R2 has been assigned a broadcast address.
B. The fa0/1 network on router R2 overlaps with the LAN attached to R1.
C. Host 2 has been assigned the incorrect subnet mask.
D. Host 1 has been configured with the 255.255.248.0 subnet mask.
E. Host 2 on router R2 is on different subnet than its gateway.

Correct Answer: BC
QUESTION 101

Refer to the exhibit. Both switches are using a default configuration. Which two destination addresses will host 4 use to send data to host 1? (Choose two.)
A. the IP address of host 1
B. the IP address of host 4
C. the MAC address of host 1
D. the MAC address of host 4
E. the MAC address of the Fa0/0 interface of the R1 router
F. the MAC address of the Fa0/1 interface of the R1 router

Correct Answer: AF
QUESTION 102
What is an appropriate use of a default route?
A. to provide routing to a local web server
B. to provide routing from an ISP to a stub network
C. to provide routing that will override the configured dynamic routing protocol
D. to provide routing to a destination that is not specified in the routing table and which is outside the local network

Correct Answer: D
QUESTION 103

Assume that the routing Protocol referenced in each choice below is configured with its default settings and the given routing protocol is running on all the routers. Which two statements accurately state the path that will be chosen between network 10.1.0.0 and 10.3.2.0 for the routing protocol mentioned? (Choose Two)
A. If OSPF is the routing protocol, the path will be from Certkiller 1 to Certkiller 3 to Certkiller 4 to Certkiller 5.
B. If OSPF is the routing protocol, the path will be from Certkiller 1 to Certkiller 2 to Certkiller 5.
C. If OSPF is the routing protocol, the path will be from Certkiller 1 to Certkiller 5.
D. If RIPv2 is the routing protocol, the path will be from Certkiller 1 to Certkiller 3 to Certkiller 4 to Certkiller 5.
E. If RIPv2 is the routing protocol, the path will be from Certkiller 1 to Certkiller 5.

Correct Answer: AE
QUESTION 104
What information does a router running a link-state protocol use to build and maintain its topological database? (Choose two.)
A. hello packets
B. SAP messages sent by other routers
C. LSAs from other routers
D. beacons received on point-to-point links
E. routing tables received from other link-state routers
F. TTL packets from designated routers

Correct Answer: AC
QUESTION 105
What are three IPv6 transition mechanisms? (Choose three.)
A. 6to4 tunneling
B. VPN tunneling
C. GRE tunneling
D. ISATAP tunneling
E. PPP tunneling
F. Teredo tunneling
Correct Answer: ACD
QUESTION 106
Running both IPv4 and IPv6 on a router simultaneously is known as what?
A. 4to6 routing
B. 6to4 routing
C. binary routing
D. dual-stack routing
E. NextGen routing

Correct Answer: D
QUESTION 107
What are some of the advantages of using a router to segment the network? (Choose two.)
A. Filtering can occur based on Layer 3 information
B. Broadcasts are eliminated
C. Routers generally cost less than switches
D. Broadcasts are not forwarded across the router
E. Adding a router to the network decreases latency

Correct Answer: AD
QUESTION 108
A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the switch Fa0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of the server is allowed by switch port Fa0/1? (Choose two.)
A. Configure port Fa0/1 to accept connections only from the static IP address of the server
B. Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors
C. Configure the MAC address of the server as a static entry associated with port Fa0/1
D. Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address
E. Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server
F. Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1
Correct Answer: CE
QUESTION 109

Refer to the exhibit. Host A pings Host B. What source MAC address and source IP address are contained in the frame as the frame leaves R2 destined for host B?
A. abcd.abcd.a001
B. abcd.abcd.b002
C. abcd.abcd.c003
D. 10.2.0.15
E. 10.0.64.1
F. 10.0.128.15

Correct Answer: BD QUESTION 110
The relevant system information regarding a Certkiller router is shown in the following display:

Refer to the partial Command output shown. Which two statements are correct regarding the router hardware? (Choose Two)
A. Total RAM Size is 32 KB.
B. Total RAM Size is 16384 KB.(16 MB)
C. Total RAM Size is 65536 KB.(64 MB)
D. FLASH Size is 32 KB.
E. FLASH Size is 16384 KB.(16 MB)
F. FLASH Size is 65536 KB.(64 MB)

Correct Answer: CE
QUESTION 111
Before installing a new, upgraded version of the IOS, what should be checked on the router, and which command should be used to gather this information? (Choose two.)
A. the amount of available ROM
B. the amount of available flash and RAM memory
C. the version of the bootstrap software present on the router
D. show version
E. show processes
F. show running-config

Correct Answer: BD
QUESTION 112
At which layers of the OSI model do WANs operate? (Choose two.)
A. application layer
B. session layer
C. transport layer
D. network layer
E. datalink layer
F. physical layer
Correct Answer: EF
QUESTION 113
Refer to the exhibit. What could be possible causes for the “Seria10/0 is down” interface status? (Choose two.)
A. A Layer 1 problem exists
B. The bandwidth is set too low
C. A protocol mismatch exists
D. An incorrect cable is being used
E. There is an incorrect IP address on the Serial 0/0 interface

Correct Answer: AD
QUESTION 114
A single 802.11g access point has been configured and installed in the center of a square office. A few wireless users are experiencing slow performance and drops while most users are operating at peak efficiency. What are three likely causes of this problem? (Choose three.)
A. mismatched TKIP encryption
B. null SSID
C. cordless phones
D. mismatched SSID
E. metal file cabinets
F. antenna type or direction

Correct Answer: CEF
QUESTION 115
Which statements describe two of the benefits of VLAN Trunking Protocol? (Chosse two.)
A. VTP allows routing between VLANs.
B. VTP allows a single switch port to carry information to more than one VLAN.
C. VTP allows physically redundant links while preventing switching loops.
D. VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.
E. VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.
F. VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.
Correct Answer: DE
QUESTION 116
Which statements are true about EIGRP successor routes? (Choose two.)
A. A successor route is used by EIGRP to forward traffic to a destination
B. Successor routes are saved in the topology table to be used if the primary route fails
C. Successor routes are flagged as “active” in the routing table
D. A successor route maybe backed up by a feasible successor route
E. Successor routes are stored in the neighbor table following the discovery process
Correct Answer: AD QUESTION 117
Refer to the exhibit. A network associate has configured OSPF with the command: City(config-router)# network 192.168.12.64 0.0.0.63 area 0 After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF. Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? (Choose three.)

A. FastEthernet0/0
B. FastEthernet0/1
C. Serial0/0
D. Seria10/1.102
E. Seria10/1.103
F. Seria10/1.104

Correct Answer: BCD
QUESTION 118
A network administrator changes the configuration register to 0x2142 and reboots the router. What are two results of making this change? (Choose two.)
A. The IOS image will be ignored
B. The router will prompt to enter initial configuration mode
C. The router will boot to ROM
D. Any configuration entries in NVRAM will be ignored
E. The configuration in flash memory will be booted

Correct Answer: BD
QUESTION 119

Refer to the topology shown in the exhibit. Which ports will be STP designated ports if all the links are operating at the same bandwidth? (Choose three.)
A. Switch A – Fa0/0
B. Switch A – Fa0/1
C. Switch B – Fa0/0
D. Switch B – Fa0/1
E. Switch C – Fa0/0
F. Switch C – Fa0/1

Correct Answer: BCD
QUESTION 120
Routing has been configured on the local router with these commands: Local(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.1 Local(config)# ip route 10.1.0.0 255.255.255.0 192.168.2.2 Local(config)# ip route 10.1.0.0 255.255.0.0 192.168.3.3 Drag each destination IP address on the left to its correct next hop address on the right.
10.1.1.10 Next hop 192.168.1.1
10.1.0.14
10.2.1.3 Next hop 192.168.2.2
10.1.4.6
10.1.0.123 Next hop 192.168.3.3
10.6.8.4

A.
B.
C.
D.

Correct Answer:
QUESTION 121

A network associate is trying to understand the operation of the Certkiller network by studying the graphic. All hosts are able to reach the enterprise server on VLAN4. The associate needs to determine which interfaces are functioning as a trunk ports. Which of the interfaces are trunks? (Choose two)
A. Switch1 – Fa0/2
B. Switch1 – Fa0/9
C. Switch2 – Fa0/3
D. Switch2 – Fa0/4
E. Switch2 – Fa0/6
F. Router – Fa1/0

Correct Answer: BF
QUESTION 122
What are three valid reasons to assign ports to VLANs on a switch? (Choose three.)
A. to make VTP easier to implement
B. to isolate broadcast traffic
C. to increase the size of the collision domain
D. to allow more devices to connect to the network
E. to logically group hosts according to function
F. to increase network security

Correct Answer: BEF
QUESTION 123
Which routing protocols will support the following IP addressing scheme? (Choose three.) Network 1 – 192.168.10.0/26 Network 2 – 192.168.10.64/27 Network 3 – 192.168.10.96/27 Network 4 – 192.168.10.128/30 Network 5 – 192.168.10.132/30
A. RIP version 1
B. RIP version 2
C. IGRP
D. EIGRP
E. OSPF

Correct Answer: BDE
QUESTION 124
Which of the following host addresses are members of networks that can be routed across the public Internet? (Choose three.)
A. 10.172.13.65
B. 172.16.223.125
C. 172.64.12.29
D. 192.168.23.252
E. 198.234.12.95
F. 212.193.48.254
Correct Answer: CEF
QUESTION 125
On the topic of OSPF routing; which of the following are the behavior of an OSPF area? (Select three.)
A. Each OSPF area requires a loopback interface to be configured.
B. Areas may be assigned any number from 0 to 65535.
C. Area 0 is called the backbone area.
D. Hierarchical OSPF networks do not require multiple areas.
E. Multiple OSPF areas must connect to area 0.
F. Single area OSPF networks must be configured in area 1.
Correct Answer: BCE QUESTION 126

A network associate is trying to understand the operation of the FLD Corporation by studying the network in the exhibit. The associate knows that the server in VLAN 4 provides the necessary resources to support the hosts in the other VLANs. The associate needs to determine which interfaces are access ports. Which interfaces are access ports? (Choose three.)
A. Switch 1 – Fa0/2
B. Switch 1 – Fa0/9
C. Switch 2 – Fa0/3
D. Switch 2 – Fa0/4
E. Switch 2 – Fa0/8
F. Router – Fa1/0

Correct Answer: ACD
QUESTION 127
You are attempting to troubleshoot some problems within your local network. Which of the following are router IOS commands that can be used to troubleshoot LAN connectivity problems? (Choose three)
A. ping
B. tracert
C. ipconfig
D. show ip route
E. winipcfg
F. show interfaces

Correct Answer: ADF
QUESTION 128
Which characteristics are representative of a link-state routing protocol? (Choose three.)
A. provides common view of entire topology
B. exchanges routing tables with neighbors
C. calculates shortest path
D. utilizes event-triggered updates
E. utilizes frequent periodic updates
Correct Answer: ACD QUESTION 129
What kind of information does a router running a link-state routing protocol need to create and maintain its topological database? (Select two answer choices.)
A. LSAs from other routers
B. Beacons received on point-to-point links
C. hello packets
D. Routing tables received from neighbors
E. SAP packets sent by other routers
F. TTL packets from exclusive routers

Correct Answer: AC
QUESTION 130
Drag each feature on the left to the appropriate routing protocol on the right.
Faster convergence RIP Version 1
Sends frequent updates
Less complex configuration
Susceptible to routing loops
Uses only event-triggered updates
Exchanges full routing table in updates OSPF
Same topology information held by all routers
Requires more memory and processing power

A.
B.
C.
D.

Correct Answer:
QUESTION 131

An administrator is unsuccessful in adding VLAN 50 to a switch. While troubleshooting the problem, the administrator views the output of the show vtp status command, which is displayed in the graphic. What commands must be issued on this switch to add VLAN 50 to the database? (Choose two.)
A. Switch(config-if)# switchport access vlan 50
B. Switch(vlan)# vtp server
C. Switch(config)# config-revision 20
D. Switch(config)# vlan 50 name Tech
E. Switch(vlan)# vlan 50
F. Switch(vlan)# switchport trunk vlan 50

Correct Answer: BE
QUESTION 132

Use the output from the router shown in the graphic above to determine which of the following are correct. (Choose two.)
A. Router John uses a link-state routing protocol
B. Router John will receive routing updates on the Serial0/0 interface
C. Router John will receive routing updates on the Serial0/1 interface
D. Router John will send routing updates out the Serial0/0 interface
E. Router John will send routing updates out the FastEthemet0/0 interface
F. Router John will send routing updates out the Serial0/1 interface

Correct Answer: BD
QUESTION 133

Drag each category on the left to its corresponding router output line on the right. Each router output line is the result of a show ip interface command. Not all categories are used.
Layer 1 problem
Layer 2 problem
Layer 3 problem
Port operational
Port disabled

Serial0/1 is up, line protocol is up
Serial0/1 is up, line protocol is down
Serial0/1 is down, line protocol is down
Serial0/1 is administratively down, line protocol is down

A.
B.
C.
D.
Correct Answer:
QUESTION 134

Assume that the routing Protocol referenced in each choice below is configured with its default settings and the given routing protocol is running on all the routers. Which two statements accurately state the path that will be chosen between network 10.1.0.0 and 10.3.2.0 for the routing protocol mentioned? (Choose Two)
A. If RIPv2 is the routing protocol, the path will be from Certkiller 1 to Certkiller 3 to Certkiller 4 to Certkiller 5.
B. If RIPv2 is the routing protocol, the path will be from Certkiller 1 to Certkiller 5.
C. If EIGRP is the routing protocol, the path will be from Certkiller 1 to Certkiller 3 to Certkiller 4 to Certkiller 5.
D. If EIGRP is the routing protocol, the path will be from Certkiller 1 to Certkiller 2 to Certkiller 5.
E. If OSPF is the routing protocol, the path will be from Certkiller 1 to Certkiller 5.

Correct Answer: BC
QUESTION 135

Which series of commands will configure router R1 for LAN-to-LAN communication with router R2? The enterprise network address is 192 1 1.0/24 and the routing protocol in use is RIP (Choose three.)
A. R1(config)# interface Ethernet 0 R1(config-if)# ip address 192.1.1.129 255.255.255.192 R1(config-if)# no shutdown
B. R1(config)# interface Ethernet 0 R1(config-if)# ip address 192.1.1.97 255.255.255.192 R1(config-if)# no shutdown
C. R1(config)# interface serial 0 R1(config-if)# ip address 192.1.1.4 255.255.255.252 R1(config-if)# clock rate 56000
D. R1(config)# interface serial 0
R1(config-if)# ip address 192.1.1.6 255.255.255.252
R1(config-if)# no shutdown

E. R1(config)# router rip R1(config-router)# network 192.1.1.4 R1(config-router)# network 192.1.1.128
F. R1(config)# router rip R1(config-router)# version 2 R1(config-router)# network 192.1.1.0

Correct Answer: ADF
QUESTION 136
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? (Choose two.)
A. The switch must be configured with an IP address, subnet mask, and default gateway.
B. The switch must be connected to a router over a VLAN trunk.
C. The switch must be reachable through a port connected to its management VLAN.
D. The switch console port must be connected to the Ethernet LAN.
E. The switch management VLAN must be created and have a membership of at least one switch port.
F. The switch must be fully configured as an SNMP agent.
Correct Answer: AC
All our Cisco products are up to date! When you buy any Cisco 640-802 product from Certpaper, as “Cisco 640-802 Questions & Answers with explanations”, you are automatically offered the Cisco 640-802 updates for a total of 90 days from the day you bought it. If you want to renew your Cisco 640-802 purchase during the period of these 90 days, your Cisco 640-802 product is renewed and you are further enabled to enjoy the free Cisco updates.

Examwind 350-029 dumps with PDF + Premium VCE + VCE Simulator: http://www.examwind.com/350-029.html